PT-RZ575

Benefits of the PT-RZ575

1. Vivid pictures are bright and detailed

• SOLID SHINE laser technology with the latest diodes delivers high 4,800 lm brightness.
• WUXGA resolution with the latest DLP™ technology. 
• Dynamic light control for 20,000:1*1 contrast. 
• Rich Colour Enhancer prioritizes colour saturation in rooms where maximum brightness is unnecessary. 
• Accurate white balance and superior colour reproduction enabled by quartet colour harmonizer technology. 
• Detail Clarity Processor 3 assures realistic clarity for fine details. 
• Daylight View Basic optimizes images for easy visibility in bright environments.

2. Excellent reliability and longer life

• Laser light source with original Panasonic technology delivers approximately 20,000 hours*2 of continuous operation. 
• Filterless design significantly reduces routine maintenance.
• Dust­resistant structure with airtight optical block. Selectable operational modes extend service life to up to 10 years*3.
• Constant brightness mode for stable performance in surveillance rooms.
• Backup input setting maintains image display for mission­critical applications

3. Flexible and functional design

• Fixed zoom lens for short­throw rear projection. 
• DIGITAL LINK supports transmission of uncompressed Full HD video and control commands through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*4.
• Free 360-­degree vertical and horizontal installation. 
• Powered focus and lens shift quick start*5/quick off (no cool­down or warm­up required).
• Edge­blending function joins screens seamlessly.
• Geometric Adjustment for curved or specially shaped screens.
• Compatible with Art­Net, AMX, Crestron Connected™, and PJLink™.
• Compatible with optional Early Warning Software (ET-­SWA100 Series).

*1 With Dynamic Contrast set to ON.
*2 Light source lifetime may be reduced depending on environmental conditions.
*3 With Operating Mode set to Long Life 3. 24 hours/day x 365 days/year x 10 years = 87,600 hours. Replacement of parts other than the light source may be required in a shorter period.
*4 150 m (492 ft) transmission available only in Long Reach Mode with optional ET­FB200G DIGITAL LINK Switcher for signals up to 1080/60p (dot­clock frequency 148.5 MHz). Transmission distance is up to 100 m (328 ft) in other cases.
*5 When Quick Startup is activated, projection starts about one second after the power button is pressed. Quick Startup mode resets to OFF if the projector has not been switched on for more than 90 minutes to reduce power consumption.

Specifications (Tentative)

*1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 With operation mode set to Normal.
*3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*4 WUXGA resolution supports CVT­RB signals (WUXGA60RB) and CVT (WUXGA60/WUXGA50) signals. When installed in conventional orientation, upper side and right side facing toward the screen are . When installed on the ceiling,  bottom side and left side are .
*5 Average value. May differ depending on the actual unit.
*6 With legs at shortest position. 
*7 The operating environment temperature should be between 0 °C (32 °F ) and 40 °C (104 °F ) when the projector is used at altitudes between 1,400 m (4,593 ft) and 4,200 m (13,780 ft) above sea level. When PROJECTOR SETUP menu  OPERATION SETTING  OPERATING MODE is set to ECO or SILENT,  the projector cannot be used at an altitude of 2,700 m (8,858 ft) or higher above sea level. When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level and the operating environment temperature is 35 °C (95 °F) or higher, light output may be reduced to protect the projector.  When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft) and the operating environment temperature is 25 °C (77 °F)  or higher, light output may be reduced to protect the projector.