Main product image
BACK TO PRODUCT CATEGORY
PT-FRZ55
Key Features

Laser 1-chip DLP, 5200 lumens (centre), WUXGA

DLP™ imaging technology, Quartet Colour Harmonizer, Rich Colour Enhancer, and digitally modulated Dynamic Contrast 2 optimization 

Maintenance free up to 20,000 hours with dust-resistant optical block and long lasting laser engine

0.8:1 short-throw lens

Supports uncompressed 4K/60p input signals via HDCP 2.2-compliant HDMI® inputs or DIGITAL LINK terminal

DLP™ imaging technology, Quartet Colour Harmonizer, Rich Colour Enhancer, and digitally modulated Dynamic Contrast 2 optimization coalesce in images of surpassing brightness, colour, and clarity regardless of ambient light levels.Powered 0.8:1 short-throw lens for rear projection joins DIGITAL LINK and CEC-ready HDMI® terminals supporting 4K/60p input signals*2. Separate LAN terminal and USB-DC outlet further streamline installation. Operation is almost inaudible at 27 dB*3.Heat-pipe cooling for the laser modules and heat-sinks for airtight DMD block support filterless design for 20,000 hours of maintenance-free projection. Multi-Laser Drive Engine has failover circuit protection while optional Early Warning software reinforces reliability.

  PT-FRZ60 PT-FRZ50 PT-FRZ55
Brightness

6,000 lm* (ANSI)/

6,200 lm (Center)

5,200 lm* (ANSI)/

5,400 lm (Center)

5,000 lm* (ANSI)/

5,200 lm (Centre)

Resolution WUXGA
Lens

2x zoom lens (1.46 – 2.94:1)

Fixed short throw lens (0.8:1)

* Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.

Dynamic Colour for Bright Rooms

Brilliant Colour Reproduction

Quartet Colour Harmonizer is an original colour-wheel mechanism featuring optimized optical design. It modulates light-output according to the image’s colour requirements, achieving wide-gamut reproduction with pure white for greater colour accuracy and depth without sacrificing brightness. Combined with stable SOLID SHINE Laser brightness and the superior uniformity of DLP™ imaging, colours appear richer and brighter without the greenish cast sometimes experienced with alternative projection technologies.

 

Rich Colour Enhancer

Rich Colour Enhancer includes a Dynamic Mode that prioritizes image brightness, and a Graphic Mode/Standard Mode to suit graphical content. This mode adjusts colour-wheel timing for deeper colour saturation in situations where projection at maximum brightness is not required.

Dynamic Contrast 2 Heightens Contrast Precision

PT-FRZ55 features a new Dynamic Contrast 2 setting that enhances 20,000:1 digitally modulated contrast precision to a level approaching our professional models. Dynamic Contrast regulates light-output frame-by-frame or scene-by-scene according to image requirements, achieving accurate contrast when bright and dark scenes frequently interchange. Whites are brighter, blacks richer, and skin-tones more natural even in well-lit environments. The technology also consumes less energy than iris-based projection systems.

 

Quiet, Versatile, and Easy to Install

Built-in Powered Short-Throw Lens

To smooth the path to stress-free installation, PT-FRZ55 features a 0.8:1 (F 1.75, f 11.9 mm) short-throw lens ideal for rear-projection in museums, exhibition spaces, control rooms, surveillance centers, or anywhere a large, bright image is required with no shadowing from passersby. The lens supports a minimum throw-distance of about 1.2 m (3.9 ft) for a 70-inch image, and includes V/H Lens-Shift (Vertical: ±4.4 %, Horizontal: ±2.1 %) with adjustment performed via remote control. The projector shares the same lens and lens-shift adjustment range as the PT-RZ575 (and will fit the same bracket), making it a cost-effective replacement. V/H Keystone Correction (Vertical: ±25 °, Horizontal: ±20 °), curved-screen correction, and Auto Image Rotation are included to further enhance installation flexibility.

 

Supports 4K/60p Signal Input*

Both projectors support uncompressed 4K/60p input signals via HDCP 2.2-compliant HDMI® inputs or DIGITAL LINK terminal. The ability to play Ultra HD video at the projectors’ resolution is invaluable when distributing the same signal to multiple 4K-ready endpoints of differing screen resolutions. An external video converter is not required, saving on installation cost, and you no longer need to reencode video to suit different display resolutions. If preferred, both video and 10Base-T/100Base-TX-compliant control-signals can be assigned to DIGITAL LINK using CAT5e STP cable (or higher), a cost-efficient way to connect over long distances.

* 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection.

CEC-ready HDMI Inputs and USB-DC Outlet

HDMI inputs are compatible with control commands from a CEC-compatible component, and allow you to power the projector on/off and commence playback using the source device’s controls. A 5 V/2 A USB-DC outlet will power an HDMI network streaming device so groups can share content to the big screen from their PCs or mobiles. USB power also supports connection of PressIT, Panasonic’s new Wireless Presentation System, for effortless one-touch transmission of content from PC or mobile––no software installation required.

Separate LAN and DIGITAL LINK Terminals

Separate LAN and HDBase-T™-based DIGITAL LINK terminals allow 100Base-TX- and 10BaseT-compatible control signals via Panasonic, Crestron®, AMX, and Extron® applications to be assigned to the dedicated LAN connection, freeing DIGITAL LINK for high-bandwidth video over cable runs of up to 150 m (492 ft).

Quiet 27 dB* Projection Mode

With more lessons and meetings now taking place online, it’s important to own a quiet projector that won’t drown out the discussion. A silent projector also helps your team to focus by limiting distractions. PT-FRZ60/FRZ50 includes a Quiet Mode that enables practically inaudible 27 dB* (PT-FRZ50) or 30 dB* (PT-FRZ60) operation. Enjoy better results from an alert audience, whether they’re in the room or watching online.

* Operating noise is 32 dB in Normal Mode (PT-FRZ50) and 35 dB in Normal Mode (PT-FRZ60).

 

Proven SOLID SHINE Laser Reliability

SOLID SHINE Laser for Dependably High Brightness

FRZ55 has durable solid-state laser modules in place of a consumable lamp. The benefits of laser projection are emphatically proven, with no need for consumable parts replacement over years of continuous 24/7 projection and a shallower brightness ramp with superior colour uniformity. Experience better picture quality for longer at a comparably lower cost. Another advantage is the ability to switch the unit on and off from the room breaker any time without risking damage to the light-source.

 

Failover Redundancy Circuits

Multi-Laser Drive Engine groups laser diodes into discrete modules protected by failover protection circuitry. If a diode in a module fails, only the affected series is bypassed and resulting brightness loss is imperceptible. If a diode fails in other laser projectors, the circuit breaks and all the diodes in the module shut down, resulting in a dramatic loss of brightness. Having multiple light-sources allows projection to continue in the unlikely event of module failure. These protections are invaluable when image display must not be interrupted.

Filterless Cooling and Airtight Optical Block

Implementation of heat-pipe-based cooling with heat-sinks for the DMD block eliminate need for an air filter. These projectors can operate continuously in dusty environments for 20,000 hours without maintenance thanks to a hermetically sealed optical engine that prevents dust intrusion and associated image degradation.

 

Other Features

Detail Clarity Processor 3

This unique Panasonic circuitry optimizes the sharpness of each image based on information gathered from four frequency bands of the video signal. The resulting images are expressed with natural and convincing realism.

 

Daylight View Basic

Panasonic’s Daylight View Basic technology achieves sharp, easily viewed images by enhancing detail, particularly in dark areas of the image that are normally difficult to see in brightly lit rooms. A built-in sensor measures ambient light while Daylight View Basic adjusts halftone color and brightness according to the surrounding level of illumination.

 

Single-Cable DIGITAL LINK Connection

DIGITAL LINK transmits uncompressed video, audio, and control commands through a single CAT 5e STP cable for distances of up to 150 m (492 ft). Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.

 

Auto Screen Image Rotation

Images are automatically rotated depending on installation orientation—upside down on the ceiling or set on a table—using a built-in angle sensor.

 

ECO Management System

Push the ECO button on the remote control to set up Eco Management functions, including automatic brightness reduction in dim ambient lighting conditions, and power consumption reduction when no input signal is detected.

 

Additional Features

  • Laser safety guaranteed
  • Quick Start / Quick Off function
  • 360-degree front and side body-rotation
  • Edge-blending and color-matching functions
  • Compatible with Art-Net DMX, Crestron Connected™, and PJLink™
  • DICOM Simulation Mode
  • Digital Fade In / Fade Out function
  • Picture-in-Picture capability
  • Screen adjustment for specially shaped screens

 

Show more

Sectors

Click an icon to find out more about the sectors this product is used in.

Education

Technology

Click an icon to find out more about the technology used

DIGITAL LINK Logo Official JPEG 247 Operation Logo PNG SOLID SHINE Laser Logo JPEG 360 Degree Free Installation Logo JPEG 4k Signal Input jpg
  • Brochures
Marketing
Brochures
Product
Image Data
Spec Files
CAD Data

Service and Support
  • PT-FRZ60 Series Catalog PDF (English)
    PT-FRZ60 Series Catalog PDF (English)
    Catalog PDF: PT-FRZ60/FRZ50/FRZ55 (English)
    Fri, 28/02/2020 - 09:22
    Download pdf - 2.84 MB

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Specification documents
Dimensions (W x H x D) 498 x 168*5 x 481 mm (19 5/8˝ x 6 5/8˝*5 x 18 15/16˝ )
Power Consumption TBD
Lens Fixed (throw ratio: 0.8:1), powered focus, F 1.75, f 11.9 mm
Resolution 1920 x 1200 pixels
Operating Environment Operating temperature: 0–45 °C (32–113 °F),operating humidity: 10–80 % (no condensation) (TBD)
Keystone Correction Range Vertical: ±40 °, Horizontal: ±20 °. When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously,correction cannot be made exceeding a total of ±60 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Cabinet Materials Molded plastic
Applicable Software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software
Contrast Ratio*1 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON)
Power Supply AC 100–240 V, 50/60 Hz
Light Source Laser diodes
Terminals | LAN RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
DLP™ Chip | Panel Size 17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method DLP™ chip x 1, DLP™ projection system
Terminals | HDMI In HDMI 19-pin x 2 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*4 ), CEC supported
Terminals | DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible,4K/60p signal input*4
Light output 5,000 lm*1/5,200 lm (Center)*2
Operation noise*1 27 dB (Quiet Mode) (TBD), 32 dB (Normal Mode) (TBD)
Projector type 1-Chip DLP™ projector
DLP™ chip | Number of Pixels 2,304,000 (1920 x 1200 pixels)
Screen size [diagonal] 1.02–7.62 m (40–300 in), 16:10 aspect ratio
Center-to-corner zone ratio*1 90 %
Time until light output declines to 50 %*3 20,000 hours (NORMAL)
Note *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *3 Aroundthis time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light outputdeclines to 50 % varies depending on environment. *4 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®. *5 With legs at shortest position. *6 Average value. May differ depending on the actual unit.
Weight*6 Approx. 16.6 kg (36.6 lbs) (TBD)
Terminals | Computer 1 In D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC)
Terminals | Video In Pin jack x 1 (composite video)
Terminals | Audio In 1 Pin jack x 2 (L, R)
Terminals | Serial In D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | USB USB connector (Type A) x 1 (Output 5 V/2 A)
Terminals | Audio Out M3 x 1 (Variable)
Terminals | Computer 2 In/1 Out D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC)
Lens shift | Vertical(From the origin point of the lens mounter) ±4.4 % (powered)
Lens shift | Horizontal(From the origin point of the lens mounter) ±2.1 % (powered)
Terminals | Audio In 2/3 M3 x 1/M3 x 1