BACK TO PRODUCT CATEGORY
    PT-DX100
    Key Features
    1-Chip DLP, 10000 lumens, XGA
    Excellent image quality thanks to the dynamic RGB Booster and Vivid Colour Control
    Dual lamp system with lamp relay mode enables 24/7 operation
    Eco filter enables up to 12000 hours of air filter replacement cycle
    10,000:1 contrast ratio
    Enquire about this product Full Specification Where to buy this product

    10000 lumens-class fixed installation projector Delivering stunning colors and highly flexible projection for museums, exhibitions and digital signage applications

    • Excellent image quality with new dynamic RGB booster and vivid colour control
    • Dual Lamp System with lamp relay mode enables 24/7 operation
    • Filter-less dust-resistant optical engine
    • 10,000lm brightness
    • XGA (1,080 x 768) resolution
    • 10,000:1 contrast ratio (when in high contrast mode)
    • Edge blending function
    • Colour matching
    • Dynamic RGB booster
    • DIGITAL LINK
    • 3D ready

    Our innovative dual-lamp system, with its new lamp, helps to make this body compact while providing 10,000lm of brightness, with 220-240V AC operation. When in ‘Lamp Relay’ mode, the system also eliminates any interruptions if a lamp should fail and enables 24/7 projection.

    Panasonic’s dynamic RGB booster also achieves high image quality alongside excellent colour reproduction and brightness. Similarly, a Detail Clarity Processor 3 brings further depth and clarity to details.

    The projector’s Dynamic Iris feature uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.

    In terms of maintenance and reliability, a dust-resistant optical block prevents dust entry to maintain image quality and a new cooling mechanism, featuring a heat-dissipating block that includes a heat pipe, reduces wear and tear on the device. Combined with a lamp replacement cycle of up to 3,000 hours, the projector delivers reduced ownership and maintenance costs.

    For enhanced system integration, DIGITAL LINK compatibility allows HDMI, uncompressed video, audio and control signals to be delivered via a single LAN cable.

    Accessories and Software

    • Recommended
    • Optional
    • Lenses
    • Ultra Short Throw Lens
    • Digital Interface Box
    • DIGITAL LINK Switcher
    • Zoom lens for 1-chip DLP projectors 
      ET-DLE085

      Zoom lens for 1-chip DLP projectors 0.8-1.0:1 throw ratio (WUXGA)

    • Zoom lens for 1-chip DLP projectors
      ET-DLE150

      1.3-1.9:1 throw ratio (WUXGA)

    • Zoom lens for 1-chip DLP projectors
      ET-DLE250

      2.3-3.6:1 throw ratio (WUXGA) 

    • Zoom lens for 1-chip DLP projectors
      ET-DLE350

      3.6-5.4:1 throw ratio (WUXGA)

    • Zoom lens for 1-chip DLP projectors
      ET-DLE450

      Zoom lens for 1-chip DLP projectors 5.4-8.6:1 throw ratio (WUXGA)

    • Fixed-focus lens for 1-chip DLP projectors
      ET-DLE055

      Fixed-focus lens for 1-chip DLP projectors 0.8:1 throw ratio (WUXGA)

    • ET-DLE105

      Zoom lens for 1-chip DLP projectors 1.0-1.3:1 throw ratio (WUXGA) 

    • Ultra short-throw detachable lens for 1-DLP projectors
      ET-DLE030

      Enables large-screen projection from a short distance.

    • Ultra short-throw detachable lens for 1-DLP projectors
      ET-DLE035

      Enables large-screen projection from a short distance

    • Digital interface box - simple AV transmission system
      ET-YFB100G

      ET-YFB100G. .

    • DIGITAL LINK Switcher - Simple AV control integration
      ET-YFB200G

      2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

    • Lamps
    • ET-LAD120

      420 W UHM lamp x 1

    • ET-LAD120W

      420 W UHM lamp x 2

    • ET-LAD120P

      420 W UHM lamp x 1, For portrait mode

    • ET-LAD120PW

      420 W UHM lamp x 2, For portrait mode

    Specifications

    Generate data sheet
    Power Supply 120-240 V AC, 10-5.2 A, 50/60 Hz
    Power Consumption (120-240V AC, 50/60Hz) 1,030 W(1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL)
    DLP™ Chip Panel Size 17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
    DLP™ Chip Display Method DLP™ chip x 1, DLP™ system
    DLP™ Chip Pixels 786,432 (1,024 x 768) x 1, total of 786,432 pixels
    Lens PT-DX100K/DX100W Powered zoom/focus lenses (1.8 - 2.5:1), F 1.7 - 1.9, f 25.6 - 35.7 mm
    Lens PT-DX100LK/DX100LW Optional powered zoom/focus lenses and fixed-focus lens
    Lamp 420 W UHM lamps (x 2)
    Screen Size 1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055 (4:3 aspect ratio), 2.54-8.89 m (100-350 inches) with the ET-DLE030 (4:3 aspect ratio)
    Brightness 10,000 lumens (dual lamp, LAMP MODE: NORMAL)
    Center-to-Corner Uniformity 90%
    Contrast 10,000:1 (full on/full off, in dynamic iris 3 mode)
    Resolution 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
    Scanning Frequency (HDMI/DVI-D) fH: 15 - 100 kHz, fV: 24 - 120 Hz, dot clock: 25 - 162 MHz
    Scanning Frequency (RGB) fH: 15 - 100 kHz, fV: 24 - 120 Hz, dot clock: 162 MHz or lower
    Scanning Frequency YPBPR (YCBCR) 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz,525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz
    Scanning Frequency (Video/S-Video) fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PALM/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
    Optical Axis Shift Vertical: +50% (powered) (±45° with the ET-DLE085/ET-DLE105), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
    Keystone Correction Range Vertical ±40°; ±30° with the ET-DLE055/ET-DLE085/ET-DLE105. Cannot be used when the ET-DLE030 is installed.
    Installation Ceiling/floor, front/rear
    Terminals HDMI In HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
    Terminals DVI-D In DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
    Terminals RGB 1 In BNC x 5
    Terminals RGB 1 In R, G, B R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
    Terminals RGB 1 In Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
    Terminals RGB 1 In S-Video Signal Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
    Terminals RGB 2 In D-sub HD 15-pin (female) x 1
    Terminals RGB 2 In R, G, B R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
    Terminals RGB 2 In Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
    Terminals 3D Sync 1 In/Out BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
    Terminals 3D Sync 2 Out BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
    Terminals Video In BNC x 1, 1.0 Vp-p, 75 ohms
    Terminals Serial In D-sub 9-pin (female)x 1 for external control (RS-232C compliant)
    Terminals Serial Out D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
    Terminals Remoter 1 In M3 jack x 1 for wired remote control
    Terminals Remoter 1 Out M3 jack x 1 for link control
    Terminals Remoter 2 In D-sub 9-pin (female)x 1 for external control (parallel)
    Terminals LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only.
    Power Cord Length 3.0 m (9 ft 10 in)
    Cabinet Materials Molded plastic
    Dimensions (W x H x D) PT-DX100K / DX100W 498 x 200 x 556 mm (19-19/32 x 7-7/8 x 21-7/8 inches) (with supplied lens)"
    Dimensions (W x H x D) PT-DX100LK / DX100LW 498 x 200 x 513 mm (19-19/32 x 7-7/8 x 20-3/16 inches) (without lens)"
    Weight PT-DX100K/DX100W Approx. 18.3 kg (40.3 lbs) (with supplied lens)
    Weight PT-DX100LK/DX100LW Approx. 17.6 kg (38.8 lbs) (without lens)
    Operation Noise 40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO)
    Operating Temperature 0℃ - 45 ℃ (32℉ - 113℉)
    Operating Humidity 10% - 80% (no condensation)
    Technology 1-Chip DLP
    Note Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *5 With legs at shortest position. *6 Average value. May differ depending on models. *7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector. *8 Operation range differs depending on environments.