There are currently no key services available.
There are currently no other services available.
|Power Supply||Supplied from the projector.|
|Modulation||Direct sequence spread spectrum (DSSS) system, Orthogonal frequency division multiplex (OFDM) system|
|Transmission Speed (Standard)*1||IEEE 802.11b: Up to 11 Mbps IEEE 802.11g: Up to 54 Mbps IEEE 802.11n: Up to 150 Mbps|
|Frequency Range (Channel)||2,412 - 2,472 MHz (1 - 13 ch)|
|Access Method||Infrastructure mode, ad-hoc mode*2|
|Security||WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit) When mounted on the PT-FW430/FX400: PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5), EAP-TTLS (MS-CHAPv2), EAP-FAST (MS-CHAPv2), EAP-FAST (GTC), EAP-TLS|
|Antenna||Tx 1, Rx 1|
|Interface||USB 2.0 (Cannot be used with any projector other than a Panasonic projector with ET-WM200 compatibility.)|
|Dimensions (W x H x D) (mm)||23 x 9 x 63 mm|
|Dimensions (W x H x D) (inch)||29/32 inch x 11/32 inch x 2-15/32 inch|
|Weight||Approx. 10 g*3 (0.4 ozs*3)|
|Operating environment*4 | Temperature||0° - 45°C (32° - 113°F)|
|Operating environment*4 | Humidity||20% - 80% (no condensation)|
|Note||*1 This is a theoretical speed. The actual transfer speed varies depending on the usage environment and connected devices. *2 Not supported by IEEE 802.11n. *3 Average value. May differ depending on models. *4 Conforms to the environmental conditions of the mounted projector.|