PT-RS30K - Visual System Solutions | Panasonic Business
Main product image
PT-RZ31K Series
PT-RS30K
Key Features

Laser 3-chip DLP, 31000 lumens (centre), SXGA+

Lamp-free laser projection and dust resistant liquid cooling system with 20000 hours of free maintenance

120Hz high frame rate for superb and sharp motion pictures

20,000:1 contrast ratio

Geometric Manager Pro, colour matching and edge blending
  PT-RQ32 PT-RZ31 PT-RS30
Brightness

27.000 lm (center) /

26.000 lm

31.000 lm (center) /

30.000 lm

31.000 lm (center) /

30.000 lm

Resolution 4K

WUXGA (1,920x 1,200)

SXGA+ (1,400x 1,050)

Contrast 20.000:1 20.000:1 20.000:1

 

  • Brighter, more immersive visual experiences
  • Ultra-durable for continuous operation
  • Exceptional image quality
  • Flexible setup

 

The PT-RZ31K Series combines 3-Chip DLP with proprietary SOLID SHINE laser technology for brighter and immersive visual experiences. Designed for convenient and flexible on-site installation, along with a range of advanced features that promote lower cost of ownership, this projector produces magnificent image quality in large venue applications.

 

ULTRA-DURABLE FOR CONTINUOUS OPERATION

Dustproof for ultimate endurance

Combining hermetically sealed laser modules, a long-life Eco Filter, and a new air-intake system, the PT-RZ31K is able to maintain picture quality in locations prone to dust contamination. Panasonic’s SOLID SHINE Laser products exceed rigorous dusting requirements to ensure stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter[1].

24/7 reliable operation

With the dual drive laser optical engine, it groups laser diodes into two discrete light sources. This means an uninterrupted projection even in the unlikely event a light source fails - ideal for mission-critical applications and high profile events. It also helps minimise brightness and colour degradation over the 20,000-hour maintenance-free service life.

 

*1 Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.

Advanced liquid cooling system assures stable operation

A unique liquid cooling system is designed to suppress temperature rises by protecting the laser engine and cooling the light source modules in high temperatures. This not only assures stable and continues operation during longer usage, it also eliminates the obtrusive and variable fan noise.

Uninterrupted coverage with backup input setting

An automatic backup input setting promises uninterrupted image display in venues such as control rooms, and giving added reassurance at events where projection can’t afford to be interrupted.

IMAGES THAT REPLICATE REAL LIFE EXPERIENCES

Experience true-to-life imagery with Detail Clarity Processor 5

New-generation circuitry analyses images frame by frame to clarify areas containing fine details and textures. Information from four frequency bandwidths is extracted using a bespoke algorithm, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise – further enhancing even the most delicate of details in 4K+ images.

20,000:1 dynamic contrast ratio

Digitally controlled frame-by-frame scene linking modulations allows you to achieve higher contrast ratio with less power consumption. Deep black levels and bright whites are delivered with outstanding depth and dimension, whilst accurate 20,000:1 contrast is achieved even when bright and dark scenes frequently interchange.

Fully optimised mapping and daylight projection

System Daylight View 3, Panasonic’s flagship daylight projection optimisation technology,

prevents pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colours.

Motion blur reduction feature

Images of up to 120 Hz*1 can be displayed with Dual-link 3G-SDI, DVI-D, and HDMI simultaneous inputs. Thanks to Panasonic’s Real Motion Processor, fast-moving images can be delivered with improved focus and smoother transitions for enhanced visibility.

 

CUSTOMISABLE SETUP AND DYNAMIC FUNCTIONALITY

Flexible projection from any angle

SOLID SHINE Laser technology enables free 360-degree installation through any axis. Courtesy of a powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion - either temporarily or in permanent applications.

Contrast sync and shutter functions

Contrast control and shutter timing are synchronized for multi-screen configurations, allowing for consistent picture quality across multiple screens. Meanwhile, the Shutter Sync function synchronizes shutter on/off timing between all networked projectors.

Sophisticated image-adjustment software

Geometry Manager Pro is free software that offers more sophisticated image-adjustment functionality and makes complex multi-screen set up easy. An optional ET-UK20 upgrade kit with Geometry Manager Pro software supports colour matching, edge blending for multi-projector set ups. It’s flexile and complex geometric adjustment capability suits a wide variety of screen shapes.

Early Warning Software ET-SWA100 Series (Optional)

Early Warning Software monitors the status of projectors and displays connected to an intranet, and notifies the operator when issues are detected or predicted. This helps to minimise downtime and provides stable and continuous operation.

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, so you can switch and change lenses to suit the venue. This reduces the total cost of ownership for staging and event companies with large projector requirements.

 

*1 Refresh-rate varies depending on vertical scanning frequency.

Show more

Sectors

Click an icon to find out more about the sectors this product is used in.

Services
Media Entertainment & Events
Media & Events

Technology

Click an icon to find out more about the technology used

3D PROFESSIONAL Logo JPEG
  • Images
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • No thumbnail - replace
  • White Papers
  • Brochures
  • PT-RZ31K Series Catalog PDF (English)
    Catalog PDF: RZ31K/RS30K (English)
  • DLP System SOLID SHINE Projector Lineup Catalog PDF (English)
    Lineup / Solution: SOLID SHINE Projector Lineup Catalog PDF (English)
Product
Spec Files
Image Data
Marketing
Spec Sheets
Brochures
White Paper
Technical
Operating Instructions
Technical Documents
Installation Manuals
General

Service and Support
  • PT-RZ31K Series Catalog PDF (English)
    PT-RZ31K Series Catalog PDF (English)
    Catalog PDF: RZ31K/RS30K (English)
    Tue, 20/03/2018 - 08:09
    Download pdf - 2.8 MB
    DLP System SOLID SHINE Projector Lineup Catalog PDF (English)
    DLP System SOLID SHINE Projector Lineup Catalog PDF (English)
    Lineup / Solution: SOLID SHINE Projector Lineup Catalog PDF (English)
    Tue, 03/04/2018 - 13:58
    Download pdf - 6.5 MB
  • PT-RZ31K Series Operating Instruction (English)
    PT-RZ31K Series Operating Instruction (English)
    Operating Instruction: RZ31K/RS30K (English)
    Tue, 20/03/2018 - 08:09
    Download pdf - 25.59 MB
    ET-SFR330 Operating Instructions (English)
    ET-SFR330 Operating Instructions (English)
    Operating Instructions: RQ32K/RZ31K/RS30K/RQ13K/RZ12K/RS11K (English)
    Tue, 03/04/2018 - 13:57
    Download pdf - 2.72 MB
    ET-EMF330 Operating Instructions (English)
    ET-EMF330 Operating Instructions (English)
    Operating Instructions: RQ32K/RZ31K/RS30K/RQ13K/RZ12K/RS11K (English)
    Tue, 03/04/2018 - 14:03
    Download pdf - 1.67 MB
    ET-D75LE95 Operating Instructions (English)
    ET-D75LE95 Operating Instructions (English)
    Operating Instructions: ET-D75LE95 (English)
    Tue, 03/04/2018 - 14:16
    Download pdf - 4.03 MB
    ET-EMFU330 Operating Instructions (English)
    ET-EMFU330 Operating Instructions (English)
    Operating Instructions: RQ32K/RZ31K/RS30K (English)
    Tue, 20/03/2018 - 08:09
    Download pdf - 2.64 MB
    Geometry Manager Pro Ver.4.0 (Including ET-CUK10 / ET-UK20) (English)
    Geometry Manager Pro Ver.4.0 (Including ET-CUK10 / ET-UK20) (English)
    Operating Instructions: Geometry Manager Pro Ver.4.0 (English)
    Wed, 28/02/2018 - 15:01
    Download pdf - 12 MB
    ET-D75LE95 Operating Instructions (Appendix) (English, French)
    ET-D75LE95 Operating Instructions (Appendix) (English, French)
    Operating Instructions: ET-D75LE95 (English, French)
    Tue, 03/04/2018 - 14:15
    Download pdf - 1.38 MB
    ET-CUK10 Operating Instructions (English, Japanese)
    ET-CUK10 Operating Instructions (English, Japanese)
    Operating Instructions: CUK10 (English, Japanese)
    Mon, 05/03/2018 - 09:01
    Download pdf - 976.59 KB
  • ET-CUK10/CUK10P Operating Instructions (English, Japanese)
    ET-CUK10/CUK10P Operating Instructions (English, Japanese)
    Operating Instructions: CUK10/CUK10P (English, Japanese)
    Tue, 03/04/2018 - 14:15
    Download pdf - 1 MB
    ET-D75MKS10 Operating Instructions (English)
    ET-D75MKS10 Operating Instructions (English)
    Operating Instructions: PT-RQ32K/RZ31K/RS30K/RZ21K/RS20K/D75LE6/D75LE8/D75LE10/D75LE20/D75LE30/D75LE40 (English)
    Wed, 28/02/2018 - 15:01
    Download pdf - 2.46 MB
    ET-D3LEF70 Operating Instructions (English)
    ET-D3LEF70 Operating Instructions (English)
    Operating Instructions: ET-D3LEF70 (English)
    Mon, 12/02/2018 - 23:13
    Download pdf - 3.55 MB
    ET-D3LEW60/D3LES20/D3LET80/D3LEW50 Operating Instructions (English)
    ET-D3LEW60/D3LES20/D3LET80/D3LEW50 Operating Instructions (English)
    Operating Instructions: ET-D3LEW60/D3LES20/D3LET80/D3LEW50 (English)
    Mon, 12/02/2018 - 23:16
    Download pdf - 5.61 MB
    ET-D3LEW60/D3LES20/D3LET80/D3LEW50 Operating Instructions Appendix (English/French/Japanese)
    ET-D3LEW60/D3LES20/D3LET80/D3LEW50 Operating Instructions Appendix (English/French/Japanese)
    Operating Instructions Appendix : ET-D3LEW60/D3LES20/D3LET80/D3LEW50 (English/French/Japanese)
    Mon, 12/02/2018 - 23:19
    Download pdf - 1.5 MB
    ET-D3LEW10 Operating Instructions (English)
    ET-D3LEW10 Operating Instructions (English)
    Operating Instructions: D3LEW10 (English)
    Wed, 06/06/2018 - 10:58
    Download pdf - 4.45 MB
  • PT-RZ31K/RS30K/RQ32K/RZ21K/RS20K/RQ13K/RZ12K/RS11K RS-232C control spec (English/Japanese)
    PT-RZ31K/RS30K/RQ32K/RZ21K/RS20K/RQ13K/RZ12K/RS11K RS-232C control spec (English/Japanese)
    RS-232C control spec: RZ31K/RS30K/RQ32K/RZ21K/RS20K/RQ13K/RZ12K/RS11K (English/Japanese)
    Thu, 01/03/2018 - 23:50
    Download pdf - 2.13 MB
  • Geometry Manager Pro Ver.4.0 (Including ET-CUK10 / ET-UK20) (English)
    Geometry Manager Pro Ver.4.0 (Including ET-CUK10 / ET-UK20) (English)
    Operating Instructions: Geometry Manager Pro Ver.4.0 (English)
    Wed, 28/02/2018 - 15:01
    Download pdf - 12 MB
    ET-D75LE50 Installation Instructions (English)
    ET-D75LE50 Installation Instructions (English)
    Installation Instructions: ET-D75LE50 (English)
    Tue, 03/04/2018 - 14:12
    Download pdf - 942.47 KB

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Power Supply AC 100-120 V, 50/60 Hz; AC 200-240 V, 50/60 Hz
Power Consumption 2,870 W (2,870 VA AC200V) Average power consumption Varies depending on operation mode setting.) HIGH: 2,310W NORMAL: 1,890W LONG LIFE 1: 1,040-1,680W LONG LIFE 2: 924-1,580W LONG LIFE 3: 794-1,460W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [2] 0.3 W with STANDBY MODE set to ECO 4 W with STANDBY MODE set to NORMAL
BTU Value Max 9,806 BTU
DLP™ Chip | Panel Size 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip | Display Method DLP™chip x 3 (R, G, B), DLP™projection system
DLP™ Chip | Pixels 1,470,000 (1400 x1050) x3, total of 4,410,000 pixels
Lens Optional powered zoom/focus lenses
Light Source Laser Diode Laser class 1
Illumination Life of Set Varies depending on operation mode setting. Luminance life for set: 18,000 hours at half luminance (HIGH)/ 8,000 hours at 70% luminance 20,000 hours at half luminance (NORMAL) 43,800 hours at constant luminance (LONG LIFE 1)/ 61,320 hours at constant luminance (LONG LIFE 2)/ 87,600 hours at constant luminance (LONG LIFE 3) * IEC62087: 2008 Broadcast contents, Dynamic contrast [3]
Screen Size 1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE95 (4:3 aspect ratio)
Brightness*1 Varies depending on operation mode setting. 30,000 lm*2*4/31,000 lm*3*4 (Center) (HIGH) 25,000 lm*2*4/26,000 lm*3*4 (Center) (NORMAL) 12,000 lm at constant luminance (LONG LIFE 1) 10,000 lm at constant luminance (LONG LIFE 2) 8,000 lm at constant luminance (LONG LIFE 3)
Center-to-Corner Uniformity*1 90%
Contrast*1 20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Resolution 1400 x1050 pixels (Input signals that exceed this resolution will be converted to 1400 x1050 pixels.)
Scanning Frequency | Video/Y/C fH:15.73KHz fV:59.94Hz, fH:15.63KHz fV:50Hz
Scanning Frequency | RGB • Resolution: 640 x 400 pixels to 1920 x 1200 pixels • Dot clock frequency: 162MHz or less • PIAS (Panasonic Intelligent Auto Scanning)
Scanning Frequency | YPBPR (YCBCR) • Resolution: 480i/576i to 1920 x 1080 pixels • Dot clock frequency: 148.5MHz or less • The SYNC/HD and VD terminals do not support 3 value SYNC.
Scanning Frequency | DVI • Moving image signal resolution: 480i*5/576i*5 to 1920x1080 Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace) • Dot clock frequency: 25 MHz to 162 MHz
Scanning Frequency | HDMI/DIGITAL LINK • Moving image signal resolution: 480i*5/576i*5 to 1920x1080 Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace) • Dot clock frequency: 25 MHz to 162 MHz
Scanning Frequency | SDI SD-SDI signal HD-SDI signal 3G-SDI signal
Optical Axis Shift | Vertical ±50% (±40% with the ET-D75LE6), (+67-71% with the ET-D75LE95), from center of screen, powered
Optical Axis Shift | Horizontal ±30% (±20% with the ET-D75LE6), (±8% with the ET-D75LE95), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Installation Ceiling/floor, front /rear, free 360-degree installation
Terminals | RGB 1 In BNC x 5
Terminals | RGB 1 In | R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 In | Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | RGB 1 In | Video in BNC x 1, 1.0 Vp-p, 75 ohms
Terminals | RGB 2 In D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | DVI-D In DVI-D 24-pin x1 Single link, DVI 1.0 compliant, HDCP compatible
Terminals | HDMI In HDMI 19-pin x1 HDCP compatible, Deep Color compatible
Terminals | SDI In 1 BNC x 1 SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual link HD-SDI (LINK-A) signal SMPTE ST 372 compliant Dual link 3G-SDI (Link 1) signal SMPTE ST 425 compliant
Terminals | SDI In 2 BNC x 1 SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual link HD-SDI (LINK-B) signal SMPTE ST 372 compliant Dual link 3G-SDI (Link 2) signal SMPTE ST 425 compliant
Terminals | DIGITAL LINK RJ-45 HDBaseT™ compliant, HDCP compatible, Deep Color compatible
Terminals | 3D Sync 1 In/Out / Multi Projector Sync In BNC x 1, IN : TTL Hi-z OUT : TTL max10mA
Terminals | 3D Sync 2 Out/Multi Projector Sync Out BNC x 1, TTL max10mA
Terminals | Serial In D-sub 9 pin x 1 for external control (RS-232C compliant)
Terminals | Serial Out D-sub 9 pin x 1 for link control
Terminals | Remoter 1 In M3 stereo mini jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 stereo mini jack x 1 for link control
Terminals | Remoter 2 In D-sub 9 pin x 1 for external control (parallel)
Terminals | DIGITAL LINK/LAN RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP)
Terminals | DC Out 5V USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA)
Power Cord Length 3.0 m (9 ft 10 in) ft
Cabinet Materials Processed metal parts, Molded plastic
Dimensions (W x H x D) 700 x 418*8x1,250 mm (27-9/16 x 16-15/32 x 49-7/32 inches) (with protrusion parts) 700 x 373*9x1,070 mm (27-9/16 x 14-11/16 x 42-1/8 inches) (without protrusion parts)
Weight*10 79 kg (174.2 lbs)
Operation Noise*2 49 dB
Operating Temperature Varies depending on operation mode setting. HIGH/NORMAL The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Less than 1,400m (4,593 ft) above sea level) The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level) • If using at ambient operating temperatures of 35 °C (95 °F) or higher and at less than 2,700m (8,858 ft) above sea level, or at ambient operating temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and 4,200m (13,780 ft) above sea level, the brightness of the light source may drop in order to protect the projector. LONG LIFE 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Less than 2,700m (8,858 ft) above sea level) • If using at ambient operating temperatures of 35 °C (95 °F) or higher, the brightness of the light source may drop in order to protect the projector. When using a smoke cut …lter (regardless of operating mode) 0 °C to 40 °C (32 °F to 104 °F) Less than 1,400 m (4,953 ft) above sea level
Operating Humidity 10%-80% (no condensation)
Note For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” *1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012 international standards. *4 In AC200V, When using a projection lens other than ET-D75LE95. *5 Pixel-Repetition signal(dot clock frequency 27.0MHz) only *6 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen. *7 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°. *8 With legs at shortest position. *9 Without legs. *10 Average value. May differ depending on the actual unit.
Brightness 30,000 lm/ 31,000 lm (Center)
Technology 3-Chip DLP Laser
Filter Life Varies depending on operation mode setting.
Filter Life | Normal Filter 4,000 hours (NORMAL)/2,000 hours (HIGH)/ 20,000 hours (LONG LIFE 1/2/3)
Filter Life | Long Life Filter Unit 20,000 hours (NORMAL)/4,000 hours (HIGH)/ 40,000 hours (LONG LIFE 1/2/3)