By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
By combining the ET-YFB100G with a DIGITAL LINK-ready projector, video, audio and control signals can be transmitted over a single cable. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmits Digital Signals with a Single Cable
Equipped with a DIGITAL LINK output terminal. Allows transmission of HDMI, uncompressed HD digital video,
audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher.
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the projector power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic projector with DIGITAL LINK compatibility.
Outputting High-Quality Images in Their Optimal Form
Digital transmission allows clear image and sound quality without any degradation even over long distances.
Digital Cinema Reality converts interlaced motion image signals into beautifully smooth progressive images.
PC signals are automatically resized and output in the optimal resolution to match the projector panel resolution.*
The Auto Setup function automatically distinguishes the input signal and adjusts it to output the optimal angle of view.
3D video format transmission is supported (Pass Through mode only)
* The output setting for the ET-YFB100G should be set to AUTO. This scaling/resizing function does not support some formats.
Ecodesign Information under EU Regulation 801/2013, please visit here: www.ptc.panasonic.eu
There are currently no key services available.
There are currently no other services available.
|Power Supply||DC 16 V (DC input terminal)|
|Power Consumption||16 W [0.2 W with the power off](including power consumption of the AC adaptor)|
|AC Adaptor | Input||100-240 V AC, 50/60 Hz|
|AC Adaptor | Output||DC 16 V, 3.75 A|
|Scanning Frequency (RGB)||fH: 15.6-99 kHz, fV: 24-119.8 Hz, dot clock: 13.5-162 MHz|
|Scanning Frequency YPBPR (YCBCR)||fH: 15.75 kHz, fV: 60 Hz [480i (525i)]fH: 15.63 kHz, fV: 50 Hz [576i (625i)]fH: 31.50 kHz, fV: 60 Hz [480p (525p)]fH: 31.25 kHz, fV: 50 Hz [576p (625p)]fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]|
|Scanning Frequency (Video/S-Video)||fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]|
|Terminals HDMI In||HDMI 19-pin x 2 (Deep Color, compatible with HDCP)480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/25p, 1080/30p, 1080/60p,1080/50p, VGA (640 x 480)-WUXGA*1 (1,920 x 1,200),audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)|
|Terminals Computer (RGB) In||D-sub HD 15-pin (female) x 2 (RGB/YPBPR/YCBCR x 2)|
|Terminals Computer (RGB) In R, G, B||G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B, R: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative); NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.|
|Terminals Computer (RGB) In Y, PB (CB), PR (CR)||Y: 1.0 Vp-p (including sync signal); PB(CB), PR(CR): 0.7 Vp-p, 75 ohms|
|Terminals Computer (RGB) 2 In/1 Out||D-sub HD 15-pin (female) x 2|
|Terminals Computer (RGB) 2 In/1 Out R, G, B||G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B, R: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)|
|Terminals Video In||RCA pin x 1 (Composite VIDEO)|
|Terminals S-Video In||Mini DIN 4-pin x 1 (S-VIDEO)|
|Terminals Audio In||M3 (L-R) x 1|
|Terminals Audio Out||M3 (L-R) x 1 (variable)|
|Terminals Serial In||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals Remoter In||D-sub 9-pin (female) x 1 for external control (parallel)|
|Terminals LAN||RJ-45 x 1, for network connection, 10Base-T/100Base-TX|
|Terminals DIGITAL LINK||RJ-45 x 1, for DIGITAL LINK connection (video, audio and control signals)|
|Dimensions (W x H x D)||210 x 44 x 250 mm (8.3" x 1.8" x 9.9") (not including protruding parts)|
|Weight Main Unit||Approximately 1.15 kg (2.54 lbs)*2 (not including AC adaptor)|
|Weight AC adaptor||Approx. 0.20 kg (0.4 lbs)|
|Operating Temperature||0℃ - 40℃ (32℉ - 104℉)|
|Operating Humidity||20% - 80% (no condensation)|
|Supplied Accessories||AC adaptor x 1, power cords (2 m) x 3, AC power cord holder x 1, AC power cord holder screw x 1, mounting brackets for rack or countertop installation x 2, mounting bracket for rack installation x 1, countersunk screws x 6, legs x 4, screws for installing legs x 4|
|Operating Environment||Operating temperature: 0-40 °C (32-104 °F), Operating humidity: 20 %-80 % (no condensation)|
|Scanning Frequency (HDMI)||fH: 27-99 kHz, fV: 24-119.8 Hz, dot clock: 25.2-162 MHz|