Our IP-based multi-door Video Intercom model works with a wide range of devices, including our lineup of CCTV IP cameras and SIP phones.
Using Power over Ethernet, the system can be connected using a single cable, reducing installation complexity and cost. The system supports up to 2,000 SIP devices using standard PoE, with the addition of a control box.
The IP-based system meets the demands of a large busy apartment building, as the system can support multiple sessions at once, unlike incumbent analogue intercom systems. The system is very straightforward to install and can easily be implemented with IP-based cabling installed as trunk lines in many new developments.
Part of the system is the room monitor: The VL-MN1000 is a 7-inch LCD capacitive touch screen which connects to a Panasonic IP camera, as well as integrating with electronic locks enabling access control straight from the monitor.
The IP video intercom system also includes door and lobby stations, with a wide angle camera and RFID reader for entry cards, supporting for up to five cards per resident.
Reception mode also gives the option for incoming calls to go to reception rather than to individual residences, giving peace of mind to residents - particularly overnight.
Full IP system
- A pure IP system
- The Door Station and Room Monitor support PoE (IEEE 802.3af compliant)
Supports large apartment systems
- Up to 2,000 SIP devices on a system with a Control Box
- Up to 200 SIP devices on a system without a Control Box
Easy installation, convenient maintenance
- Easy Setup (Includes setup tool for mass configuration of 2000 devices)
- E-mail Notification (Control Box required)
- Voice Mail (Control Box required)
- Visitor Recording
There are currently no key services available.
There are currently no other services available.
|Power Source||Power supply unit (VL-PS240) 220-240 V AC, 24 V DC, 0.6 A|
|Power Consumption||Standby: 3.4 W, During operation: 6.0 W|
|Dimensions (H x W x D)||Approx. 373 x 179 x 6 mm (excluding sections embedded into the wall)|
|Mass (Weight)||Approx. 1.5 kg|
|Operating Environment||Ambient temperature: Approx. -10 °C to +55 °C Relative humidity (non-condensing): up to 90 %|
|Display||3.5-inch colour display (320x240 pixels)|
|Display Language||English, Arabic, French, Italian, German, Spanish and Dutch *Only user guidance supports multiple language Resident’s names are only in English|
|Network Interface||10Base-T/100Base-TX(Auto MDI/MDI-X)|
|Wiring||UTP (cat.5e or higher)|
|Expanded Interface||Support for electric lock releasing (entrance unlocking) x 1|
|Viewing Angle||Horizontally: Approx. 120°, Vertically: Approx. 72° (15° angle adjusting, vertical only)|
|Image Sensor||2.0 M pixels CMOS sensor|
|Minimum Illuminance Required||1 lx (within approx. 50 cm from the camera lens)|
|Lighting Method||White coloured LED lights|
|SIP Server||Embedded SIP server (up to 200 devices)|
|IP Rating (Ingress Protection)||IP55 (Water resistance is only assured if lobby station/the doorphone installed correctly according to the instructions in the Operating Instructions, and appropriate water protection measures are taken.)|
|IK Rating (Impact Protection)||Compliant with IK07|
|Installation Method||Flush mount (flush mounting box supplied)|
|(VL-PS240) Power Source||Input: 220-240 V AC, 0.2 A (50/60 Hz) , Output: 24 V DC, 0.6 A|
|(VL-PS240) Dimensions (H x W x D)||Approx. 116 x 100 x 54 (mm)|
|(VL-PS240) Mass (Weight)||Approx. 230 g|
|(VL-PS240) Operating Environment||Ambient temperature: Approx. 0 °C to +50 °C Relative humidity (non-condensing): up to 90 % (indoor use only)|
|(VL-PS240) Installation Method||Wall mount or attach to DIN rail|
|(VL-PS240) External Material||Flame retardant PC+ABS resin|
|Network Protocol||TCP/IP, UDP|
|Card Reader (RFID)||13.56 MHz (ISO/IEC 14443 Type A (MIFARE))|
|Video/Audio Format||Video: H.264 / Audio: G.711|