
The Panasonic AK-HCU355A Camera Control Unit supports high definition 1080/59.94i, 1080/50i, 480/59.94i, 576/50i, 1080/29.97psF (over 59.94i), 1080/23.98psF (over 59.94i), 1080/23.98psF (over 47.96i), 1080/25psF (over 50i), 1080/23.98psF and 1080/25psF output, and 1080/50i/59.94i, 576/50.00i, 480/59.9 RET IN formats. It‘s designed to work with the AK-HC3500A production/studio camera for studio and EFP (electronic field production) applications.
- Images
- Case Studies
- Brochures
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
LAN | For use with PC connections x 1 line (10Base-T, 100Base-TX: Cross cable) |
---|---|
Weight | Approx. 9 kg (Approx. 19.8 lb) |
Dimensions (W x H x D) | 200mm x 120 mm x 445 mm (7-7/8 inches x 4-3/4 inches x 17-9/16 inches) excluding protrusions |
Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
Power Supply | DC 12 V AC 100 V to 120 V, 50 Hz/60 Hz (AK-HCU355AP) AC 220 V to 240 V, 50 Hz/60 Hz (AK-HCU355AES/355AE) |
Power Consumption | 37 W (excluding power supply) 340 W (include power supply) |
Operating Humidity | 10 % to 90 % (no condensation) |
Reference Input | Black burst/tri-level x 2 lines (loop-through x 1 line)*2 *3 *5 |
Video Output | HD-SDI/SD-SDI x 4 lines*1 (shared by picture monitor output 1 line*4) Analogue composite x 2 lines (shared by picture monitor output 1 line*4) |
Communication | Intercom input/output(0 dBm, 600 Ω, 2W/RTS/4W*4) x2 lines (ENG/PROD) PGM input (0 dBm/600 Ω) x 2 lines Tally input (Red, Green) x 1 line each |
Trunk | RS-422/RS-232C x 2 lines*4 |
Return Input | HD-SDI/SD-SDI x 4 lines |
Prompter Input | Analogue composite x 2 lines*2 |
Sync Output | Analogue sync, HD (±0.3 V [p-p]) / SD (1 V [p-p]) (with 75 Ω termination) x 1 line*4 |
MIC Output | 0 dBm/600 Ω x 2 lines |
WFM CONT | For WFM control (open collector output) |
AUX | For setting down-conversion system (photo-coupler input) For tally, alarm (open collector output) |
ROP I/F | RS-422 x 1 line, 12 V output |
MSU I/F | RS-422 x 1 line, GPI for control |
Note | *1: Embedded audio is supported only for HD signal output. *2: Prompter input 2 and reference input 2 share the same connector so only one of these inputs can be selected at one time. *3: The black burst signal and tri-level sync signal of reference input 1 are recognized automatically. *4: Depending on the setting, only one of these outputs can be selected at one time. *5: Reference input 2 supports only dual sync tri-level sync signal input when the 23.98PsF format applies. |
Capacity for Supplying Power to a Camera | AC 220V to 240 V, 1.2 A, 50 Hz/60 Hz (AK-HCU355AP) AC 220V to 240 V, 1.2 A, 50 Hz/60 Hz (AK-HCU355AES/355AE) |
WFM Output | Analogue composite x 1 line*2 |