The AW-RP150 will be the newest remote camera controller to compliment Panasonic's comprehensive professional PTZ camera lineup. It has the same great functionality of the AW-RP120 and AW-RP50, and joins the lineup with significant improvements over those models, including a new one-hand operation joystick (controlling PTZ or Focus) and a large touch-panel LCD screen for monitoring and menu setting.
A seesaw lever mounted on the joystick manages pan and tilt operations for zoom and focus control and intuitive single-handed operation.
The built-in touch display allows for easy and quick operation of all essential camera functions.
Rear View & Newly Designed Joystick
Dimensions : mm (inch) (Preliminary)
* Specications are subject to change without notice
There are currently no key services available.
There are currently no other services available.
|Power Requirements||12 V DC (10.8 V to 13.2 V)|
|Current Consumption||1.0 A (Connector Input) 0.6 A (PoE+ power supply)|
|Ambient Operating Temperature||0 °C to 40 °C (32 °F to 104 °F)|
|Ambient Operating Humidity||20% to 90% (no condensation)|
|Storage Temperature||-20 °C to 50 °C (-4 °F to 122 °F)|
|Weight||Approx. 3.2 kg (7.05 lb)|
|Dimensions (W x H x D) (mm)||342 mm x 178 mm x 245 mm(excluding protrusions)|
|Dimensions (W x H x D) (inch)||13-15/32 inches x 7 inches x 9-21/32 inches(excluding protrusions)|
|Controller Supported Equipment||IP/RS422 AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1|
|Input||DC 12 V IN XLR 4-pin 3G-SDI IN SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF|
|Output||ACTIVE THRU OUT SMPTE292 / 75 Ω (BNC x 1)|
|Input/Output||IP CONT: ======== 100BASE-TX ---------- PoE+ input ---------- Connection cable: LAN cable, max. 100 m (328 ft) ・When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ・When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended ================ SERIAL CONT (RJ-45): ======== RS-422 (control signals for remote cameras), TALLY OUT ---------- Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) ---------- TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA ================ TALLY/GPIO 1 ======== D-sub 25-pin, female, inch thread ---------- TALLY IN : 10 inputs (for receiving photocoupler signals) ---------- GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings ================ GPIO 2 ======== D-sub 25-pin, female, inch thread ---------- GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) ・Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature)|
|LCD Display||7-inch Touch Panel GUI Monitor (WVGA (800×480) )|
|SD Memory Card Slot||SDHC / SDXC Memory Card Slot x 1|
|No. of Connectable Cameras||200 (IP), 5 (RS422)|
|No. of Camera Selection Buttons||10|
|No. of Camera Groups||20 (10 units per 1 group)|
|Preset Memory||No. of memory : presets 100|
|Tracing Memory||No. of cameras : Cam1 to Cam10 Recording time, no. of memory settings : Maximum 5 min. total per camera, maximum of 10 settings per camera|
|No. of User Assignable Buttons||6 + up to 10 on the LCD menu|
|Pan / Tilt Speed Adjustment||7 levels|
|Tally LED display color||green / red|
|Note||*1: Connection with the AW-RP150GJ is planned for future support. Contact your sales representative for further information on when support will be available for this feature. Use may require a software version update. *2: Level-A support only.|
|PoE+||IEEE802.3at standard: DC 42 V to 57 V (Camera Input)|